Instructions
- The input bits A1, A0 (the number A) and B1, B0 (the number B) start at 0. Click on an
input bit to toggle its value between 0 and 1.
- Start - Starts the simulation for the selected inputs. While it runs, the same
button pauses and resumes it.
- Select the speed (1x, 2x or 4x) from the dropdown menu, before or during the simulation.
- The three outputs show whether A = B, A > B or A < B. Exactly one of them is 1.
- When the simulation finishes, the outputs are shown. Change the inputs and click on
Start again to try another combination.
- Reset - Resets the simulation and sets all the inputs back to 0.