Instructions
- All the input bits (INPUT 0, INPUT 1 and SELECT) start at 0. Click on an input bit to
toggle its value between 0 and 1.
- Start - Starts the simulation for the selected inputs. While it runs, the same
button pauses and resumes it.
- Select the speed (1x, 2x or 4x) from the dropdown menu, before or during the simulation.
- When SELECT is 0 the OUTPUT follows INPUT 0, and when SELECT is 1 the OUTPUT follows
INPUT 1.
- When the simulation finishes, the OUTPUT is shown. Change the inputs and click on
Start again to try another combination.
- Reset - Resets the simulation and sets all the inputs back to 0.